For some of the problems that occur in some semi-trailer are often we usually pay no attention to these details caused by attention to detail is not only a good habit, but also allows you to safety on the road, this is particularly reflected in our semi-trailer industry. We usually should be done, one by one to check each screw is tightened, run away a screw on the road are small, run a tire is money can be resolved, but if ran out of an accident, but to repent ah. We also hope that we can attach importance.
First，the visual look no lack of gas, debris attached to the phenomenon, look at the steel ring with or without deformation, cracks and other phenomena.
Second ,pay attention to look at the semi-trailer suspension system, take a look at all nuts and bolts, U-shaped bolt tension, which are related to whether to eat the fetus, otherwise the problem would be in trouble.
Third,the rocking leg to ensure that the normal, outrigger check to shake up and down to try a few, and then look at whether the welding cracks, especially now run off the car hanging faithful, we must pay attention to this problem.
Fourth, touch the wear and tear of moving parts, hand touch the box hinge, box hook, inserted pile, container locks and other small parts, to see if there is no crack off phenomenon. Do not look at the normal touch on the line, turn on the lights to see there is no bad light, reflective logo missing is not missing, I believe that there are cards on the road due to reflective logo defect was fined off.
We usually use the time in the use of semi-trailer maintenance more attention to some of the details, always thinking about safety first, will be able to "successful career, all the way open."