1 maintenance of the body clean, remove dirt and obstacles on the body.
2 Check the oil and circuit and control equipment at each lubrication station and add the lubricating oil as required.
3 before the work of each class, in the mixing tube to add water to idle 1 - to 2min, while checking the clutch and brake device reliability.
4 concrete mixer operation process, should always check the motor, reducer, transmission gear noise is normal, the temperature rise is too high,
5 After the end of each class work, should be carefully cleaned concrete mixer.
6 To ensure that its technical performance, in the maintenance of transformation must pay attention to not shoddy, must use high-quality bearings.